What product is suitable for liquid silica gel injection machine?

Liquid silica gel ejectors can wrap hardware with metal inserts or soft materials at one time to form plastic products with complex appearance, accurate size or dense texture. It is widely used in defense products, mechanical and electrical products, transportation products, building materials, packaging shells, sanitary products and various fields of people's daily life. Liquid silica gel injection machine is also suitable for the production of various ordinary and special products or molds. Suitable for silicone products. Such as baby products, medical supplies, diving products and other products. The color paste pump can be selected according to the needs, and can produce products of various colors.

Manufacturer of liquid silica gel injection machine

The silicone rubber metering and mixing equipment of liquid silica gel ejector is a high quality feeding system. A powerful hydraulic drive system acts on the feed pump from the drive unit to avoid side forces that increase wear during mechanical coupling. When the feeder receives the start signal. The metering is carried out in the automatic mode, and the material pressure regulator keeps the pressure constant in each metering cycle. This is particularly important when the demand for feed is small to ensure the amount of glue.

The liquid silica gel injection machine needs to change the glue type regularly, and the pipeline needs to be cleaned. At this time, first close the feed valve of the liquid silica gel injection machine and open the discharge valve. After the residual rubber in the rubber cylinder is discharged, close the discharge valve, open the feed valve, pour the cleaning solvent into the storage cylinder, activate the machine body, press out and flush the solvent according to the normal operation mode. The liquid silica gel injection machine needs to be cleaned regularly to prolong the service life of the machine. The more compounds mixed together, the faster the reaction and the faster the curing rate. Therefore, it must be analyzed according to the actual production situation, otherwise it will cause waste of compounds and improve the production management efficiency of products.

When the liquid silica gel injection machine does not work for a long time, the power supply should be pulled out, which can not only prolong the service life of the machine, but also save a lot of electric energy. With the rapid development of industrial demand, liquid control technology and equipment continue to develop to ultra-high precision control, diversification and specialization. As silica gel products are easily affected by ultraviolet radiation and aging problems, UV protection test should be carried out in the production of products to ensure good use effect. At present, the detection of liquid silicone injection machine is also gradually increasing.

The above is the liquid silicone injection machine suitable for production of products, hope to see it can help you, if you want to know more about the liquid silica gel injection machine related information, welcome to online consulting customer service or call our company service hotline (top right corner of the website) for consultation, we will wholeheartedly provide you with quality service!